Filter
Top Products
IP Configuration Commands
8
Factory default
255.255.255.0
Related Commands
net set lan ip
net show lan
This command displays the LAN interface parameters
net show lan
Syntax description
This command has no arguments or keywords
Configuring WAN Interface
The section describes commands for setting and displaying WAN interface parameters.
net set wan dns
This command is used to specify the DNS servers for the WAN interface. Up to two DNS
servers can be specified.
net set wan dns pri_server [sec_server]
Syntax description
pri_server Primary DNS server for the WAN interface
sec_server Secondary DNS server for the WAN interface. Optional.
Factory default
Primary DNS server: 0.0.0.0
Secondary DNS server: 0.0.0.0
net set wan gateway
This command is used to specify the default gateway for the WAN interface.
net set wan gateway ip_addr
Syntax description
ip_addr IP address of the default gateway for the WAN interface
Factory default
0.0.0.0
The LAN interface only supports Class C network. That is, the subnet mask
for the LAN interface must be greater than or equal 255.255.255.0.
ë
Note