Filter
Top Products
Call Progress Tone Configuration Commands
31
5. Voice and Fax Coder Configuration Commands
The coding profile is used to store coding parameters for voice and fax coders that
can be used by any telephony port on the ITG. The ITG has 4 built-in coding profiles,
each having a unique profile ID and parameters for a specific voice or fax application.
Table 5-1 summarizes coding profiles available for voice and fax applications.
Profile ID Profile
Name
Coder
0 g723 G.723 6.3 kbps voice coder
1 g729 G.729AB voice coder
2 g723_53 G723 5.3 kbps voice coder
3 g711
G.711 µ-law voice coder
5 fax Standard T.38 fax coder
Table 5-1 Coders and Coding Profiles
This chapter is organized as follows:
l Common coding profile configuration commands
l
Voice coding profile configuration commands
l Fax coding profile configuration commands
Common Coding Profile Configuration Commands
The following sections describe commands that apply to all types of coding profiles.
set coding default
This command resets the parameters for all coding profiles to factory default values.
set coding default
Syntax description
This command has no arguments or keywords
show coding profile_id
This command displays parameters for a coding profile.
show coding profile_id
Syntax Description
profile_id Profile ID or name, as shown in Table 5-
1, of the coder to be
modified.
Voice Coding Profile Configuration Commands
The following sections describe commands that apply to coding profiles for voice coder.