Filter
Top Products
Telephony Interface Port Configuration Commands
22
set port_cfg call_limit
This command is used to set a call length limit for calls on a telephony port. If the call length
is exceeded, the call is automatically terminated.
set port_cfg call_limit seconds
Syntax description
seconds Value in seconds, ranging from 0 to 65534, or –
1 or 65535 for
forever.
Factory default
-1
set port_cfg default
This command resets the port-common parameters to factory default values.
set port_cfg default
Syntax description
This command has no arguments or keywords
set port_cfg fax_prof
This command is used to select the preferred fax coding profile for a telephony port. Please
refer to 5. Voice and Fax Coder Configuration Commands
on page 31 for details about coding profile.
set port_cfg fax_prof profile_id
Syntax description
profile_id Preferred coding profile ID for fax
Factory default
The factory default preferred fax coding profile for all the telephony ports is coding
profile number 5, which is the coder for standard T.38 fax.
set port_cfg out_type
The ITG supports tone-dial and pulse-dial. This command is used to select the dial-out
characteristic of a telephony port.
set port_cfg out_type {tone | pulse}
Syntax description
tone Tone dial
pulse Pulse dial
Factory default