Filter
Top Products
H.323 Configuration Commands
42
false Always c
laim call setup failure when ITG fails obtaining ACF from
the gatekeeper.
Factory default
true
set h323 alt_gk
When the ITG is configured in gatekeeper mode, it can specify two gatekeepers, default and
alternate, to register with. After failing registering to the default gatekeeper, the ITG will
attempt to register to the alternate gatekeeper. This command is used to specify the address
of the alternate gatekeeper.
set h323 alt_gk ip_addr
Syntax Description
ip_addr IP address of the alternate H.323 gatekeeper
Factory default
0.0.0.0
Related Commands
set h323 alt_gk_name
set h323 alt_gk_name
When the ITG is configured in gatekeeper mode, it can specify two gatekeepers, default and
alternate, to register with. After failing registering to the default gatekeeper, the ITG will
attempt to register to the alternate gatekeeper. This command is used to specify the host
name of the alternate gatekeeper.
set h323 alt_gk_name host_name
Syntax Description
host_name Host name of the alternate H.323 gatekeeper
Factory default
Null
Related Commands
set h323 alt_gk
Once the IP address of the alternate gatekeeper is specified, the host name
of the alternate gatekeeper specified via CLI command set h323
alt_gk_name does not take effect.
ë
Note
If the IP address of the alternate gatekeeper has been specified via CLI
command set h323 alt_gk, the setting of the host name does not take
effect.
ë
Note