Filter
Top Products
H.323 Configuration Commands
41
address field of sourceAddress UUIE of the H.323 Setup message
Factory default
Null
Related Commands
set h323 call_name
set h323 display_name
show h323
This command displays all H.323 related parameters.
show h323
Syntax description
This command has no argument or keyword
H.323 Gatekeeper Related Configuration Commands
The following sections describe the general H.323 configuration commands.
set h323 alias
This command is used to create and delete aliases that are registered with the gatekeeper.
set h323 alias {add | del} {“alias” | all}
Syntax description
add Create an alias alias
del Delete a previously created alias alias
or all previously created
aliases, if the parameter that follows is all.
alias Alias to be created or deleted
all Delete all previously created aliases. This optional applies to
del
only
set h323 allow_calls_wo_gk
When gatekeeper mode is enabled, before initiating a call to a remote gateway or accepting
an incoming from a remote gateway, the ITG sends an Admission Request (ARQ) to the
gatekeeper and expects a Admission Confirmation (ACF) from the gatekeeper before
proceeding with call setup. If the ARQ is not confirmed, the ITG may claim call setup failure,
or automatically switch to non-gatekeeper mode and proceed with call setup with the remote
gateway. This command is used to set how the ITG handles call setup under gatekeeper mode
when the ITG fails obtaining ACF from the gatekeeper.
set h323 allow_calls_wo_gk {true | false}
Syntax description
true
Allow call setup with remote gateway even the ITG fails obtaining
ACF from the gatekeeper.