Filter
Top Products
User’s Manual of WGSD-1022/WGSD-8000
- 150 –
Figure 4-80 Server Logs screen
There are five items, as below:
• Server
Specifies the server to which logs can be sent.
• UDP Port (1-65535)
Defines the UDP port to which the server logs are sent. The possible
range is 1 to 65535.
The default value is 514.
• Facility
Defines a user-defined application from which system logs are sent to
the remote server. Only one facility can be assigned to a single
server. If a second facility level is assigned, the first facility is
overridden. All applications defined for a device utilize the same
facility on a server. The possible field values are Local 0 - Local 7.
The field default is Local 7.
• Description
Where provides a user-defined server description.
• Minimum Severity
Indicates the Minimum severity from which logs are sent to the server.
For example, if Notice is selected, all logs from a Notice severity and
higher are sent to the remote server.
If you want to add the Server Log configuration to the Server Log Table, use the Add to List button at the bottom of the screen.
"Note:
When a severity level is selected, all severity level choices above the selection are selected
automatically.
4.12.12 Memory Logs
The Memory Log screen (see figure 4-81) contains all system logs in a chronological order that are saved in RAM (Cache), Log