Filter
Top Products
User’s Manual of WGSD-1022/WGSD-8000
- 86 –
• Action on Violation
Where indicates the action to be applied to packets arriving on a locked port. The
possible field values are:
• Discard, which discards packets from any unlearned source. This is the
default value.
• Forward Normal, forwards packets from an unknown source without learning
the MAC address.
• Discard Disable, which discards packets from any unlearned source and
shuts down the port. The port remains shut down until reactivated, or until the
device is reset.
• Enable Trap
This enables traps when a packet is received on a locked port.
• Trap Frequency
Which the amount of time (in seconds) between traps.
The default value is 10 seconds
#Note:
In order to change the Learning Mode, the Lock Interface must be set to unlocked. Once the mode is
changed, the Lock Interface can be reinstated.