Filter
Top Products
User’s Manual of WGSD-1022/WGSD-8000
- 99 –
Aggregate Policer, where user-defined aggregate policers. The Aggregate Policer button opens the New Aggregate Policer
screen.
Aggregate Policer Setting
New Aggregate Policer screen (see figure 4-44):
Figure 4-44 Aggregate Policer Settings screen
The page contains the following fields:
• Aggregate Policer
Name
Where enter a name in this field.
• Ingress Committed
Information Rate
(CIR)
This defines the CIR in bits per second. This field is only relevant when the Police
value is Single.
• Ingress Committed
Burst Size (CBS)
This defines the CBS in bytes per second. This field is only relevant when the
Police value is Single.
• Exceed Action
Action assigned to incoming packets exceeding the CIR.
This field is only relevant when the Police value is Single. Possible values are:
• Drop, which drops packets exceeding the defined CIR value.
• Remark DSCP, where remarks packet’s DSCP values exceeding the defined
CIR value.
• None, forwarding packets exceeding the defined CIR value.