Filter
Top Products
User’s Manual of WGSD-1022/WGSD-8000
- 356 –
Command Mode
Interface configuration (Ethernet, port-channel)
User Guidelines
An internal usage VLAN is required when an IP interface is defined on Ethernet port or Port-channel.
Using this command the user can define the internal usage VLAN of a port.
If an internal-usage is not defined for a Port, and the user wants to define an IP interface, the software chooses one of the
unused VLANs.
If a VLAN ID was chosen by the software for internal usage, and the user wants to use that VLAN ID for static or dynamic VLAN,
he should either remove the IP interface, creates the VLAN, and recreate the IP interface, or use this command to define explicit
internal usage VLAN.
Examples
The following example reserves a VLAN as the internal usage VLAN of an interface..
Console (config)# ip internal-usage-vlan 10
5.27.19 show vlan
The show vlan privileged EXEC command displays VLAN information.
Syntax
show vlan [tag vlan-id | name vlan-name]
vlan-id — A valid VLAN ID
vlan-name — A valid VLAN name string. (Range: 1 - 32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays all VLAN information.
console# show vlan