Filter
Top Products
User’s Manual of WGSD-1022/WGSD-8000
- 308 –
User Guidelines
RSA keys are generated in pairs: one public RSA key and one private RSA key. If the device already has RSA keys, a warning
and prompt to replace the existing keys with new keys is displayed.
The maximum supported size for the RSA key is 2048 bits.
This command is not saved in the startup configuration; however, the keys generated by this command are saved in the running
configuration, which is never displayed to the user or backed up to another device.
This command may take a considerable period of time to execute.
Example
The following example generates RSA key pairs.
Console (config)# crypto key generate rsa
5.22.5 ip ssh pubkey-auth
The ip ssh pubkey-auth global configuration command enables public key authentication for incoming SSH sessions.
To disable this function, use the no form of this command.
Syntax
ip ssh pubkey-auth
no ip ssh pubkey-auth
Default Configuration
The function is disabled.
Command Mode
Global Configuration mode
User Guidelines
AAA authentication is independent.
Example
The following example enables public key authentication for incoming SSH sessions.
Console (config)# ip ssh pubkey-auth
5.22.6 crypto key pubkey-chain ssh
The crypto key pubkey-chain ssh global configuration command enters SSH Public Key-chain configuration mode. The mode
is used to manually specify other device public keys such as SSH client public keys.