Filter
Top Products
User’s Manual of WGSD-1022/WGSD-8000
- 93 –
Figure 4-38 Bandwidth screen
Queue shaping can be based per queue and/or per interface. Shaping is determined by the lower specified value. The queue
shaping type is selected in the Bandwidth screen, include interface, port, LAG, Rate Limit, Ingress Rate Limit Status, Rate
Limit….
The page contains the following fields:
• Interface
Indicates the interface for which the queue shaping information is displayed. The
possible field values are:
• Port, indicates the port for which the bandwidth settings are displayed.
• LAG, indicates the LAG for which the bandwidth settings are displayed.
• Ingress Rate Limit
Status
which indicates if rate limiting is defined on the interface
• Rate Limit
(62-1000000 Kbps)
Defines the amount of bandwidth assigned to the interface.
The possible field values are 62-1000000 Kbps.
• Egress Shaping
Rate on Selected
Port
Indicates if rate limiting is enabled on the interface.
• Committed
Information Rate
(CIR)
Defines CIR as the queue shaping type.
The possible field value is 64 - 1,000,000 Kbps.