Filter
Top Products
User’s Manual of WGSD-1022/WGSD-8000
- 36 –
possible field range is 1-5.
• Month -- The month of the year in which DST begins every year. The possible
field range is Jan.-Dec.
• Time -- The time at which DST begins every year. The field format is
Hour:Minute, for example, 02:10.
• To
Defines the recurring time that DST ends each year. For example, DST ends locally
every fourth Friday in October at 5:00 am. The possible field values are:
• Day -- The day of the week at which DST ends every year. The possible field
range is Sunday-Saturday.
• Week -- The week within the month at which DST ends every year. The
possible field range is 1-5.
• Month -- The month of the year in which DST ends every year. The possible
field range is Jan.-Dec.
• Time -- The time at which DST ends every year. The field format is
Hour:Minute, for example, 05:30.
SNTP Server
• Server1
Enter a user-defined SNTP server IP addresses or hostname. Up to twot SNTP
servers can be defined.
The primary server provides SNTP information.
• Server2
The backup server provides SNTP information.
• Poll Interval
(60-86400 sec)
Defines the interval (in seconds) at which the SNTP server is polled for Unicast
information.
The factory default value is 1024.
#Note:
The device supports the Simple Network Time Protocol (SNTP). SNTP assures accurate network
device clock time synchronization up to the millisecond. Time synchronization is performed by a
network SNTP server. SNTP operates only as a client, and cannot provide time services to other
systems.
4.3 Port Configuration
In this field, you can see these parts, such as port settings, Link aggregation, LACP.
4.3.1 Port settings
To use the port settings screen for setting up each of the switch’s ports.
It shows these parts: port, description, admin status, link status, speed, duplex,
MDI/MDIX, Flow control, type, LAG, PVE (see Figure 4-6):