Filter
Top Products
User’s Manual of WGSD-1022/WGSD-8000
- 188 –
Default Configuration
Not trusted.
Command Mode
Global configuration mode
User Guidelines
The command is relevant for both unicast and broadcast.
Examples
The following example authenticates key 8.
Console(config)# sntp authentication-key 8 md5 ClkKey
Console(config)# sntp trusted-key 8
Console(config)# sntp authenticate
5.5.8 sntp client poll timer
The sntp client poll timer global configuration command sets the polling time for the Simple Network Time Protocol (SNTP)
client. To return to default, use the no form of this command.
Syntax
sntp client poll timer seconds
no sntp client poll timer
seconds — Polling interval in seconds (Range: 60 - 1024)
Default Configuration
1024
Command Mode
Global configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example sets the polling time for the Simple Network Time Protocol (SNTP) client to 120 seconds.
Console(config)# sntp client poll timer 120