Filter
Top Products
97707987 Rev A 19
The timeout settings for connections are:
• 30 seconds for Short
• 60 seconds for Medium
• 300 seconds for Long.
The timeout settings for transfers are:
• 150 seconds for Short
• 300 seconds for Medium
• 1500 seconds for Long.
5 Enter Max Clients. This is the maximum number of concurrent
FTP client connections.
6 Enter Max Clients per IP. This is the maximum number of
concurrent FTP client connections per IP address.
7 Enter the Max Transfer Rate. This is the maximum rate, in
Bytes, of FTP data transfer.
8 Click on the Security tab. This allows you to enter IP addresses
and/or hostnames which you wish to explicitly Allow or Deny
FTP access to the SNAZ.
Note: When hosts are added to either the Allow or Deny lists, all
other hosts automatically become marked as the opposite, unless
they are specified otherwise.
9 Click to save the changes and, as appropriate, click
to start or click to stop the service.