Filter
Top Products
42 97707987 Rev A
5 Select a RAID Level from the drop-down list. This can be
either:
• RAID 0 - RAID 0 is a striped disk array without fault
tolerance. Provides data striping (spreading out blocks of
each file across multiple disk drives) but no redundancy.
This improves performance but does not deliver fault
tolerance. If one drive fails then all data in the array is lost
• RAID 1 - RAID 1 provides disk mirroring. Level 1 provides
twice the read transaction rate of single disks and the
same write transaction rate as single disks
• RAID 5 - RAID 5 provides data striping at the byte level
and also stripe error correction information. This results in
excellent performance and good fault tolerance. Level 5 is
one of the most popular implementations of RAID.
6 Select a Chunk Size (KB) from the drop-down list. This is the
size of the data chunks written to each disk.
7 Select the disks you wish to be members of the RAID from the
Disks available for new RAID list. The new RAID will
allocate all available storage space on those disks to the RAID.
8 Click to add the new RAID.