Filter
Top Products
26 97707987 Rev A
SNMP Notification
To enable SNMP notification:
1 From the menu bar, select System - Notification. Click on the
SNMP tab. The System - Notification (SNMP) page opens:
2 Tick the Enable box to enable, or untick to disable, the SNMP
notification service.
3 Enter a GET Community String. By default the SNAZ does
not use Community Strings to authenticate sent notifications.
However, if required, a Community String can be entered here
to enable this function.
4 Enter a Contact Name for SNMP notifications. The Contact
Name specifies the person to contact for the host, and how you
can contact this person (such as by telephone extension or
email address), for example: John Smith, X 1234,
smith@plasmon.com.
5 Enter a Contact Location for SNMP notifications. The Contact
Location specifies the geographical location of the host, for
example: SNAZ-S4, Server Room 2, Plasmon HQ, UK.
6 Enter the TRAP Address (IP addresses) and TRAP Community
String of up to five SNMP notification Recipients.