Filter
Top Products
3 Connect your audio source to the AUDIO IN 1 port on the
projector. Refer to Connecting computer audio later in this
c h a p t e r .
Note: If you are using a second computer video or audio
source, plug the output cables for these sources into the
RGB IN 2 and AUDIO IN 2 connectors.
4 If you want to use an external monitor, connect the monitor
cable to the RGB OUT port of the projector.
5 Turn the projector on and press the STANDBY/ON key.
Note: To use the projector, you do not need an external
monitor.
Connecting Use the video cable adapter shown below to connect a
Macintosh computers Macintosh computer to the projector.
The Macintosh
cable adapter
Use the cable adapter and supplied VGA video cable to con-
nect the projector to your Macintosh computer.
Detailed setup 17