Filter
Top Products
Turning on the projector and lamp
Turn on the projector before you turn on your computer.
This allows the computer to sense the projector during its
startup sequence.
Move the AC power switch to the ON position. The ON indi-
cator on the projector control panel glows orange.
The lamp is off when you first turn on the projector. Press
the STANDBY/ON key on the operator panel for one second
to turn the lamp on. The ON indicator blinks for a few sec-
onds while the lamp warms up, and then turns a steady
green. Next, turn on your computer.
Caution! Never operate the projector if the air intake or
exhaust grills are clogged or obstructed, or if the electric
fans are not running.
3 Using the projector