Filter
Top Products
User’s Guide for the Polycom PowerCam Presenter
2 - 14
To use a Presenter View:
¾ Press one of the Presenter View buttons:
— Tight zooms in more closely on the presenter.
— Wide zooms out further away from the presenter.
— Left moves the camera to the left of the presenter.
— Right moves the camera to the right of the presenter.
Remember that these settings are merely guidelines, and that you can set and
change the Presenter View buttons to whatever you need.
Enabling and Disabling Automatic Zooming
When you use automatic camera tracking, you typically want the camera to
automatically zoom in and out on the presenter. At other times, however, you
may want a fixed zoom so that the zoom remains the same whether the
presenter moves closer to or away from the camera. In such cases, you can
disable automatic zooming.
To enable and disable automatic zooming:
¾ Press Auto Zoom on the remote control.
If automatic zooming was enabled, it becomes disabled; if it was disabled,
it becomes enabled. The message
Auto zoom is ON or Auto zoom is OFF
momentarily appears on the screen to let you know whether automatic
zooming is enabled or disabled.
Tight
Wide
Left
Right
Note
If the camera does not accurately frame the presenter when automatically zooming,
you may need to calibrate the camera or adjust the framing. For more information,
refer to the “The camera is not accurately framing you” symptom on page 3-6.