Filter
Top Products
Chapter 2-First Time Installation and Configuration
2-6
Unpacking the RMX 4000
To unpack and lift the RMX 4000:
1 When you receive the RMX 4000 packing case, inspect the equipment
for damage and verify that the components match the packing slip.
2 The RMX 4000 is shipped in a packing case with Stratocell®
packaging, and the top cover must be unlocked and lifted.
3 Open the top cover of the packing case.
Two boxes are placed on the top Stratocell®, labelled:
— Installation Accessories. This kit contains the power cables and a
Disk-on Key (DOK).
— Rack Installation Accessories. This kit contains the accessories for
the 19” & 23” racks as follows:
Make sure that boxes contain all the required parts.
Write down the RMX’s serial number that is on a sticker on the back of the unit.
It will be needed for product registration later in the process.
Table 2-3 19” & 23” Rack Installation Accessories Package
Item ID Description Quantity
MEC2474A-L0 Chassis runner (60cm in length) for
rack installation on the RMX 4000.
19” & 23” racks both require that
these runners be installed on the
rack.
2
MEC2475A-L0 23" bracket to be fitted to the front of
the RMX 4000.
2