Polycom DOC2560C Server User Manual


 
Polycom RMX 1500/2000/4000 Getting Started Guide
2-27
11 Click Next.
12 If you selected H.323 only, go to Step 15.
Table 2-7 Fast Configuration Wizard – Gatekeeper
Field Description
Gatekeeper Select Specify to enable configuration of the
gatekeeper IP address.
When Off is selected, all gatekeeper options are
disabled.
Primary Gatekeeper
IP Address or
Name
Enter either the gatekeeper’s host name (if a DNS
Server is used) or IP address.
MCU Prefix in
Gatekeeper
Enter the string with which the MCU registers itself
with the gatekeeper.
The gatekeeper uses this string to identify the MCU
when forwarding calls to it.
H.323 endpoints use this number as the first part of
their dial-in string when dialing the MCU.
Aliases
Alias The alias that identifies the RMX’s Signaling Host
within the network. Up to five aliases can be defined
for each RMX.
Note: When a gatekeeper is specified, at least one
prefix or alias must be entered in the table.
Type The type defines the format in which the card’s alias
is sent to the gatekeeper. Each alias can be of a
different type:
H.323 ID (alphanumeric ID)
E.164 (digits 0-9, * and #)
Email ID (email address format,
e.g. abc@example.com)
Participant Number (digits 0-9, * and #)
Note: Although all types are supported, the type of
alias to be used depends on the gatekeeper’s
capabilities.