Filter
Top Products
System Management
7–3
2 From the Display filter list you can select between emergency, critical,
error, warning, notice, info or debug depending on the logs you want to
see.
3 Click Save if you want to save the logs in a file.
Wireless Server Information
This page provides information about the firmware version and ARI code of
the KWS300.
1 Click Status, and then click Wireless Server.
Figure 7-3 Adm. Page KWS300: Status/WS page
Packet Capture
The Packet Capture page is used to create traces in PCAP format for
debugging. These traces can be viewed with the Wireshark program
(www.wireshark.org).
1 Click Status, and then click Packet Capture.
Figure 7-4 Adm Page KWS300: Status/Packet Capture page
Table 7-1 Packet Capture
Field Explanation Required Optional
Packet Capture - Filters
Capture
SIP
Enable this check box to capture SIP
signalling.
x