Primera Technology LX800 Printer User Manual


 
Using the Printer 31
Available barcode types are listed here:
EAN and UPC EAN-8, EAN-8 + 2-digit supplement, EAN-8 + 5-digit
supplement, EAN-13, EAN-13 + 2-digit supplement,
EAN-13 + 5-digit supplement, EAN-14, DUN-14, UPC
Case Code, UPC-A, UPC-A + 2-digit supplement,
UPC-A + 5-digit supplement, UPC-E, UPC-E + 2-digit
supplement, UPC-E + 5-digit supplement, EAN.UCC
128, SSCC, Bookland, Addon 2, Addon 5
Linear Interleaved 2 of 5, ITF 14, ITF 16, Code 39, Code 39 Tri
Optic, Code 39 Full ASCII, Code 32, Code 93, CODE 128
(A, B and C subsets), MSI, Codabar, Postnet-32,
Postnet-37, Postnet-52, Postnest-62, Kix, Pharmacode
RSS Linear RSS symbologies
RSS14, RSS14 Truncated,
RSS14Stacked, RSS14 Stacked Omnidirectional, RSS
Limited, RSS Expanded
Composite RSS
symbologiesRSS14, RSS14 Truncated, RSS14 Stacked,
RSS14 Stacked Omnidirectional, RSS Limited, RSS
Expanded, UPC-A, UPC-E, EAN-8, EAN-13, EAN.UCC
128 & CC-A/B, EAN.UCC 128 & CC-C
2D Barcodes 2D-Pharmacode, PDF-417, DataMatrix, MaxiCode,
Aztec, QR, Micro QR, Codablock F, MicroPDF
Define the barcode dimensions in the Barcode Dimensions
Field. The height is set in cm by entering the appropriate
number in the Symbol Height Field. The width of the barcode is
set as the X Expansion factor. Note that the width can be set
only in pre-defined standard steps.
When you change the barcode dimension directly from the
screen by moving the drag handle, the changed dimension will
also appear in this dialog box.
Some of the barcode types also allow the definition of Narrow-
to-wide bar ratio. It can only be set from the predefined steps in
the pull-down menu - 1:2, 1:3 or 2:5.
Base element width (mils) is calculated automatically from the X
expansion factor.
v. The Check Digit Tab will allow you to include a system
automated check digits or enter your own. Check digits can
be disabled on some barcodes from this tab as well.
510910.qxd 9/26/2005 2:33 PM Page 31
TOC
INDEX