Filter
Top Products
GETTING STARTED
13
4. The form should be face down as shown in the picture. Place the left
edge of the new form in the left tractor with the holes aligned with
tractor pins. Make sure that the top edge of the form does not extend
above the top of the tractors.
5. Close the left tractor door.
6. Now position the paper in the right tractor in the same fashion. If
necessary, the position of the right tractor may be adjusted. To do
so, move the lever on the side of the tractor back to unlock the
tractor and slide the tractor sideways on the shafts.
7. After the paper is placed in the tractor and the door is closed,
position the tractor far enough to the right so that there is no buckle in
the paper between the tractors, but not so tight that the holes in the
paper are distorted. Lock the tractor in place by returning the lever
to the forward position.
Informing the Printer That the New Form is Loaded
1. Press the LOAD/FEED button. The display will now show that the
new form has been “loaded”.
2. Close the paper door.
3. Make sure the correct form to be positioned for printing is selected
and press either the LOAD/FEED button or the ONLINE button. The
LOAD/FEED button will position the form for printing but will not
place the printer on line. The ONLINE button will both position the
form and place the printer on line.