Filter
Top Products
18
Chapter 2 The Configuration Menu
Saving Your New Configuration
After changing all of the necessary parameters, it is recommended you save
them as a configuration that can be stored for future use and loaded later. If
you do not save your configuration before you power off the printer, all of your
parameter changes will be erased. The Save Config. option allows you to
save up to eight configurations to meet different print job requirements.
Configurations 1 through 8 are empty until you save values to them using the
Save Config. option. For example:
Config 1: Selects LQ typeface, 5 cpi, 6 lpi
Config 2: Selects Near LQ typeface, 6 cpi, 8 lpi
Once you have saved a configuration using this option, it will not be lost if you
power off the printer. You can load a configuration for a specific print job and
modify and resave it. You may want to print your configurations and store
them in a safe place, such as inside the printer cabinet.
NOTE: The Protect Configs. parameter must be set to disable before you can
save a configuration. Once you save a configuration, the Protect
Configs. parameter automatically returns to enable. Once you change
active emulations, any changes to the previously selected emulation
will be gone unless they have been saved.
* = Factory Default
CONFIG.
CONTROL
Load Config.
Save Config. Print Config.
Delete Config.
Power-Up
Config.
Protect
Configs.
1
2
3
4
5
6
7
8
Name Configs. Reset Cfg.
Names