Filter
Top Products
Set Absolute Horizontal Print Position
67
Set Absolute Horizontal Print Position
ASCII Code ESC $
n1 n2
Hex Code 1B 24
n1 n2
Dec Code 27 36
n1 n2
Purpose Moves the horizontal print position to the position specified by
the following formula:
Horizontal position =
n1
+ (
n2
* 256) + left margin.
Where:
0 <=
n1
<= 127
0 <=
n2
<= 255
The unit setting for this command is 1/60 inch.
Comment The printer ignores this command if the specified position is to
the right of the right margin.
Set Bottom Margin
ASCII Code ESC N
n
Hex Code 1B 4E
n
Dec Code 27 78
n
Purpose Sets the bottom margin on continuous paper to
n
lines (in the
current line spacing) from the top-of-form position on the next
page.
Where:
1 <=
n
<= 127
0 <
n
*(current line spacing) < page length
Comment This was formerly called the “Set skip-over-perforation”
command.
This command affects the front panel setting of “Bottom
Margin.”
The default depends on the power-up configuration.
Cancel Bottom Margin
ASCII Code ESC O
Hex Code 1B 4F
Dec Code 27 79
Purpose Cancels the bottom margin settings.
Comment This was formerly called the “Cancel
skip-over-perforation”
command.
This command affects the front panel setting of “Bottom
Margin.”