Filter
Top Products
60
Chapter 3 Configuring The KSSM Emulation With Control Codes
Select Double-width Printing (One Line)
ASCII Code SO
Hex Code 0E
Dec Code 14
Purpose Doubles the width of all characters, spaces, and intercharacter
spacing (set with the ESC SP command) on the same line as
the command.
Comment This command is cancelled when the printer receives the
following commands: LF, FF, VT, DC4, ESC W 0, and CR.
This command works under both ASCII and Hangul modes.
The default is Normal (non double-width) printing.
Cancel Double-width Printing (One Line)
ASCII Code ESC SO
Hex Code 1B 0E
Dec Code 27 14
Purpose Cancels the double-width printing of all characters, spaces, and
intercharacter spacing (set with the SO command).
Comment This command works under both ASCII and Hangul modes.
Cancel Double-width Printing (One Line)
ASCII Code DC4
Hex Code 14
Dec Code 20
Purpose Cancels double-width printing selected by the SO or ESC SO
commands.
Comment This command does not cancel double-width printing selected
with the ESC W command.
The default is Normal (non double-width) printing.