Filter
Top Products
56
Chapter 3 Configuring The KSSM Emulation With Control Codes
Select Bold Font
ASCII Code ESC E
Hex Code 1B 45
Dec Code 27 69
Purpose Sets the weight attribute of the font to Bold.
Comment This command increases the weight of printed lines and
characters, resulting in bolder printing.
This command affects “Bold Print” on the front panel.
The default is Normal (non-bold) print.
Cancel Bold Font
ASCII Code ESC F
Hex Code 1B 46
Dec Code 27 70
Purpose Sets the font to Normal (cancels the bold print previously set
with the ESC E command).
Comment This command affects “Bold Print” on the front panel.
The default is Normal (non-bold) print.
Select Character Style
ASCII Code ESC q
n
Hex Code 1B 71
n
Dec Code 27 113
n
Purpose Turns on/off outline and shadow printing, according to the
parameters below:
n
= 0 Turns off outline/shadow printing
n
= 1Turns on outline printing
n
= 2Turns on shadow printing
n
= 3Turns on outline and shadow printing
Where:
0 <=
n
<= 3
Comment This command does not affect graphics characters.