Filter
Top Products
Command Line Interface (CLI) AP-700 User Guide
CLI Batch File
202
executes the CLI commands. Commands that do not require a reboot take effect immediately, while commands that
require a reboot (typically commands affecting a wireless interface) will take effect after reboot.
Auto Configuration and the CLI Batch File
The Auto Configuration feature allows download of the LTV format configuration file or the CLI Batch file. The AP detects
whether the file uploaded is LTV format or a CLI Batch file. If the AP detects a CLI Batch file (a file with extension .cli), the
AP executes the file immediately.
The AP will reboot after executing the CLI Batch file. Auto Configuration will not result in repeated reboots if the CLI Batch
file contains rebootable parameters.
CLI Batch File Format and Syntax
The CLI Batch file must be named with a .cli extension to be recognized by the AP. The maximum file size allowed is 100
Kbytes, and files with larger sizes cannot be uploaded to the AP. The CLI commands supported in the CLI Batch File are
a subset of the legal AP CLI commands.
The follow commands are supported:
• Set commands
• Reboot command (the reboot command ignores the argument (time))
Each command must be separated by a new line.
NOTE: The following commands are not supported: Show command, Debug command, Undebug command, Upload
command, Download command, Passwd command, Kill command, and the Exit, Quit, and Done commands.
Sample CLI Batch File
The following is a sample CLI Batch File:
set sysname system1
set sysloc sunnyvale
set sysctname contact1
set sysctphone 1234567890
set sysctemail email@domain.com
set ipaddr 11.0.0.66
set ipaddrtype static
set ipsubmask 255.255.255.0
set ipgw 11.0.0.1
set wif 4 autochannel disable
set wif 4 mode 1
set syslogstatus enable
set sysloghbstatus enable
set sysloghbinterval 5
set wif 4 netname london
reboot
Figure A-18 Sample CLI Batch File
Reboot Behavior
When a CLI Batch file contains a reboot command, the reboot will occur only after the entire CLI Batch file has been
executed.
There are two methods of uploading the CLI Batch File:
• Upload