1-4
Chapter One
6 Turn the projector on and press the STANDBY/ON key.
NOTE: If you turn the projector off while the computer is running, the
external monitor will go blank. This is normal. Just turn the projector back
on, and the monitor display will return.
Notebooks
NOTE: If you are connecting to an Apple PowerBook, attach the Mac - VGA
cable adapter to the computer’s Video Out port (or video adapter cable).
1 Plug the COMPUTER end of the VGA Video cable into the notebook’s
VGA Out port or into the Mac - VGA cable adapter (Macintosh only).
2 Plug one end of the VGA Video cable into the RGB IN 1 port on the
projector.
3 Connect your audio source to the AUDIO 1 IN port on the projector.
4 Turn on the projector and press the STANDBY/ON key.
Special Configurations
If your computer has an internal monitor but no external video capability
(such as the Macintosh Performa 575, PowerMac 5200, and certain
PowerBooks), you need a video adapter card in order to attach the DP5500.
Setup for a third-party adapter is identical to the procedures outlined in the
Quick Start section above. Contact your dealer, Proxima Customer Service, or
a third-party supplier for more information about an appropriate video
adapter.