Filter
Top Products
5 – Fibre Alliance MIB Objects
Port Table
5-42 59047-09 C
S
Syntax
INTEGER
Access
read-write
Status
mandatory
Return Value
The symbolic port name. A 1G or 2G only capable port, would return port
followed by the port number. 10G ports would return 10G followed by the
port number. For example, a 1G/2G port#2 would return 'Port2' and a 10G
port#18 would return '10G-18' by default.
connUnitPortPhysicalNumber (1.3.6.1.3.94.1.10.1.18)
This is the internal port number this port is known by. In many implementations,
this should be the same as connUnitPortIndex. Some implementations may have
an internal port representation not compatible with the rules for table indexes. In
that case, provide the internal representation of this port in this object. This value
may also be used in the connUnitLinkPortNumberX or connUnitLinkPortNumberY
objects of the connUnitLinkTable.
Syntax
INTEGER
Access
read-only
Status
mandatory
Return Value
The physical port number.
connUnitPortStatObject (1.3.6.1.3.94.1.10.1.19)
This contains the OID of the first object of the table that contains the statistics for
this particular port. If this has a value of zero, then there are no statistics available
for this port. The port type information will help identify the statistics objects that
will be found in the table.
Syntax
OBJECT IDENTIFIER