Filter
Top Products
5 – Fibre Alliance MIB Objects
Trap Table
5-98 59047-09 C
S
trapRegPort (1.3.6.1.3.94.2.3.1.2)
The UDP port to send traps to for this host. Normally this would be the standard
trap port (162). This object is an index and must be specified to create a row in
this table.
Syntax
INTEGER (1..2147483647)
Access
read-only
Status
mandatory
Return Value
The configured port number of where to send traps when they occur. The
port number can be configured in the switch SNMP setup parameters.
Default is 162.
trapRegFilter (1.3.6.1.3.94.2.3.1.3)
This value defines the trap severity filter for this trap host. The connUnit will send
traps to this host that have a severity level less than or equal to this value. The
default value of this object is “warning”.
Syntax
FcEventSeverity
Access
read-write
Status
mandatory
Return Value
A value indicating the trap severity level. Refer to Table 5-28 for trap severity
levels.
trapRegRowState (1.3.6.1.3.94.2.3.1.4)
Specifies the state of the row.
rowDestroy
READ: Can never happen.
WRITE: Remove this row from the table.