Q-Logic 59047-09 C Switch User Manual


 
4 – MIB-II Objects
The IP Address Translation Table
59047-09 C 4-27
A
Access
read-write
Status
mandatory
Return Value
Writes not supported.
ipRouteInfo (1.3.6.1.2.1.4.21.1.13)
A reference to MIB definitions specific to the particular routing protocol which is
responsible for this route, as determined by the value specified in the route's
ipRouteProto value. If this information is not present, its value should be set to the
OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identifier. Any
conformant implementation of ASN.1 and BER must be able to generate and
recognize this value.
Syntax
OBJECT IDENTIFIER
Access
read-only
Status
mandatory
The IP Address Translation Table
The IP address translation table contain the IpAddress to`physical' address
equivalences. Some interfaces do not use translation tables for determining
address equivalences (for example, DDN-X.25 has an algorithmic method). If all
interfaces are of this type, then the Address Translation table is empty, that is, has
zero entries.
ipNetToMediaIfIndex (1.3.6.1.2.1.4.22.1.1)
The interface on which this entry's equivalence is effective. The interface
identified by a particular value of this index is the same interface as identified by
the same value of ifIndex.
Syntax
INTEGER
Access
read-write