Filter
Top Products
59047-09 C 4-1
4 MIB-II Objects
This section covers the implementation details for the MIB-II on the SANbox
switch. A MIB defines the properties of the managed object within the device to be
managed. Every managed device keeps a database of values for each definition
written in the MIB. It is not the actual database itself; it is implementation
dependant. Definition of the MIB conforms to the SMI given in RFC 1155. The
latest Internet MIB is given in RFC 1213, and is sometimes called MIB-II.
Groups in MIB-II
Refer the Table 4-1 for the syntax for MIB-II Groups.
System Group
Implementation of the System group is mandatory for all systems. If an agent is
not configured to have a value for any of these variables, a string of length 0 is
returned.
Table 4-1. MIB-II Groups
Group Syntax
system OBJECT IDENTIFIER ::= { mib-2 1 }
interfaces OBJECT IDENTIFIER ::= { mib-2 2 }
at OBJECT IDENTIFIER ::= { mib-2 3 }
ip OBJECT IDENTIFIER ::= { mib-2 4 }
icmp OBJECT IDENTIFIER ::= { mib-2 5 }
tcp OBJECT IDENTIFIER ::= { mib-2 6 }
udp OBJECT IDENTIFIER ::= { mib-2 7 }
snmp OBJECT IDENTIFIER ::= { mib-2 11 }