Filter
Top Products
6 – Fabric Element MIB Objects
Module Table
6-4 59047-09 C
S
Return Value
The total number of switches in the fabric if ProxyEnable setting is Enabled
on the out-of-band switch. If ProxyEnable setting is disabled on the
out-of-band switch, return value = 1.
Module Table
The objects described in this section are in table format indexed by switch. An
example of how to access one of these objects is: "snmpget localhost public
fcFeModuleDescr.1". This table contains one entry for each module.
fcFeModuleDescr (1.3.6.1.2.1.75.1.1.4.1.2)
A textual description of the module. This value should include the full name and
version identification of the module.
Syntax
SnmpAdminString
Access
read-only
Status
current
Return Value
A configuration description of the module table entry. The defaults are:
SANbox 5200 = SANbox 5200 FC Switch, SANbox 5202 = SANbox 5202
FC Switch, SANbox 5600 = SANbox 5600 FC Switch, SANbox 5602 =
SANbox 5602 FC Switch
fcFeModuleObjectID (1.3.6.1.2.1.75.1.1.4.1.3)
The vendor's authoritative identification of the module. This value may be
allocated within the SMI enterprises subtree (1.3.6.1.4.1), and provides a means
for determining what kind of module is being managed.
For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor
“Neufe Inc.” was assigned the subtree 1.3.6.1.4.1.99649, and had assigned the
identifier 1.3.6.1.4.1.99649.3.9 to its FeFiFo-16 PlugInCard.
Syntax
OBJECT IDENTIFIER
Access
read-only