Filter
Top Products
Draft
Page vi Preliminary IB0056101-00 G.02
S
QLogic HCA and QLogic OFED Software Install Guide
QLogic OFED Version 1.4
Changed title of Troubleshooting issue. Was
“
ipath_ether Configuration Setup Gener-
ates Error”
“Outdated ipath_ether Configuration Setup
Generates Error” on page A-5
Change main configuration file from /etc/sys-
config/infinipath to /etc/infini-
band/openib.conf. The infinipath file is
still to enable or disable the ipath_mtrr script.
Table C-1 on page C-1 and “SRP” on page 6-4.
Updated note about setting datagram mode. “Configuring the IPoIB Network Interface” on
page 6-2
Deleted Troubleshooting Issue OpenFabrics
Dependencies.
“Software Installation Issues” on page A-2
Deleted Troubleshooting Issue Version Number
Conflict with opensm-* on RHEL5 Systems
“Software Installation Issues” on page A-2
Two new tables showing OS package require-
ments. Replaces some bullet points in “Distribution
Identifiers” on page 5-2
Table on page 5-4 and Table on page 5-4
Removed section “Check for Missing Files or
RPMs”
Was “Check for Missing files or RPMs” on
page 5-5
Merged the two sections Downloading the QLogic
OFED Software and Choose the Appropriate
Download Files
“Choose the Appropriate Download Files” on
page 5-4
Removed Supported Compilers and Supported
Linux Distributions from the 2 Feature Overview
chapter. Information is still in Software Installation
chapter.
2 Feature Overview
Moved table “
InfiniPath and OpenFabrics
RPMs to Use for Each Node in a Cluster” from
Software Installation section to Appendix
“Package Descriptions” on page D-1
Consolidated Configuring the InfiniPath Drivers
and InfiniPath and OpenFabrics Driver Overview
6 Configuring Drivers and Services
opensm is now off by default Various
Merged “Install on an Unsupported Distribution
with the rpm Command” with the Rebuilding...sec-
tion.
Now “Rebuilding the kernel-ib Driver on an
Unsupported Distribution or an Unsupported Distri-
bution/Kernel Pair” on page 5-19
Removed $ or # at beginning of lines indicating
commands. The #, if cut and pasted from the docu-
ment, may be interpreted as a shell command.
All. Also Table 1-1
Updated footnote b. Table D-11