Filter
Top Products
Draft
Software Installation
Install QLogic OFED User-level Software with the rpm Command
IB0056101-00 G.02 Preliminary 5-17
A
OpenFabrics/32bit/
OpenFabrics-Static/
OpenFabrics-Static/32bit/
OpenFabrics-Devel/
OpenFabrics-Devel/32bit/
OpenFabrics-Devel-Static/
OpenFabrics-Debuginfo/
OpenFabrics-Debuginfo/32bit/
OpenSM/
OpenSM/32bit/
OpenSM-Debuginfo/
OpenSM-Debuginfo/32bit/
OpenSM-Devel/
OpenSM-Devel/32bit/
OpenSM-Static/
OpenSM-Static/32bit/
OtherHCAs/
OtherHCAs-Debuginfo
OtherHCAs-Debuginfo/32bit/
OtherHCAs-Devel/
OtherHCAs-Devel/32bit/
OtherHCAs-Devel-Static/
OtherHCAs-Devel-Static/32bit/
OtherMPIs/
Install QLogic OFED User-level Software with the
rpm Command
The QLogic User-level software is for installation over OFED 1.4 supplied from
OpenFabrics or with Linux distribution.
For convenience, QLogic recommends that all RPMs are installed on all nodes.
Please note that the infinipath RPM must be installed on all nodes where you
install the mpi-frontend RPM.
1. Use the Downloads tab on the QLogic web site to locate your adapter
model.
http://www.qlogic.com
After downloading the appropriate tar file, type:
$ tar zxvf
InfiniPath<version>-<date>-<distribution>-x86_64.tgz