Filter
Top Products
B – Command Line Interface
Set Config Command
B-26 59042-02 A
ALFairness Arbitration loop fairness. Enables (True) or
disables (False) the switch’s priority to
arbitrate on the loop.
ARB_FF Use ARB_FF instead of idles on loop
FCAL option
InteropCredit Interoperability credit. The number of
buffer-to-buffer credits per port. 0 means
the default (12) is unchanged.
ExtCredit Extended credits. The number of port
buffer credits that this port can acquire
from donor ports.
FANEnable Fabric address notification. Enables (True)
or disables (False) the communication of
the FL_Port address, port name, and node
name to the logged-in NL_Port.
LCFEnable Link control frame preference, R_CTL =
0xC
MFSEnable Multi-Frame Sequence bundling
MFS_TOV MFS limit for camp on
MSEnable Management Server enable on this port
NoClose Don't close unless another device
arbitrates
I/O Stream Guard Enables or disables the suppression of
RSCN messages
VIEnable Enable VI preference routing
CheckAlps Close before sending frames to new target
Table B-7. Set Config Port Parameters (Continued)
Parameter Description