Filter
Top Products
B – Command Line Interface
Show Command
59042-02 A B-49
The following is an example of the Show Setup SNMP command:
SANbox2 $> show setup snmp
SNMP Information
----------------
Contact Technical Support
Location N_112 System Test Lab
Description QLogic SANbox2 FC Switch
Trap1Address 10.20.8.35
Trap1Port 182
Trap1Severity warning
Trap1Enabled True
Trap2Address 10.20.32.114
Trap2Port 162
Trap2Severity warning
Trap2Enabled True
Trap3Address 10.20.32.114
Trap3Port 172
Trap3Severity warning
Trap3Enabled True
Trap4Address 255.255.255.255
Trap4Port 1
Trap4Severity warning
Trap4Enabled False
Trap5Address 255.255.255.255
Trap5Port 1
Trap5Severity warning
Trap5Enabled False
ObjectID 1.3.6.1.4.1.1663.1.1.1.1.11
AuthFailureTrap True