B – Command Line Interface
Show Setup Command
B-60 59042-02 A
Show Setup Command
Displays the current SNMP and system settings.
Authority User
Syntax show setup
mfg
snmp
system
Keywords mfg
Displays manufacturing information about the switch.
snmp
Displays the current SNMP settings.
system
Displays the current system settings.
Examples The following is an example of the Show Setup Mfg command:
SANbox2 $> show setup mfg
Manufacturing Information
-------------------------
BoardSerialNumber 000004260
BrandName QLogic
BuildDate Unknown
ChassisPartNumber Unknown
ChassisSerialNumber S02270092
MACAddress 00:c0:dd:00:c2:b5
PlanarPartNumber Unknown
SwitchSymbolicName SANbox2
SwitchWWN 10:00:00:c0:dd:00:c2:b4
SystemDescription QLogic SANbox2 FC Switch
SystemObjectID 1.3.6.1.4.1.1663.1.1.1.1.11
The following is an example of the Show Setup Snmp command:
SANbox2 $> show setup snmp
SNMP Information
----------------
Contact <sysContact undefined>
Location <sysLocation undefined>
Trap1Address 10.20.8.35
Trap1Port 182
Trap1Severity warning
Trap1Enabled True
Trap2Address 10.20.32.114
Trap2Port 162