Quantum 890 USE 155 Network Card User Manual


 
Glossary
50
default gateway
The IP address of the network or host to which all packets addressed to an unknown
network or host are sent. The default gateway is typically a router or other device.
DHCP
Dynamic Host Configuration Protocol. A network protocol used to configure IP
addresses dynamically. DHCP is an extension of BOOTP.
DNS
Domain Name System. A protocol within TCP/IP used to find IP addresses based on
host names.
field
A logical grouping of contiguous bits that convey one kind of information, such as the
start or end of a message, an address, data or an error check.
frame
A group of bits which form a discrete block of information. Frames contain network
control information or data. The size and composition of a frame is determined by the
network technology being used.
framing types
Two common framing types are Ethernet II and IEEE 802.3.
FTP
File Transfer Protocol. A networking protocol used to exchange files between stations
on a network or over the Internet.
gateway
A device which connects networks with dissimilar network architectures and which
operates at the Application Layer. This term may refer to a router.
host
A node on a network.
hostname
A domain name given to a specific computer on a network and used to address that
computer.
HTTP
HyperText Transport Protocol. A protocol used to deliver hypertext documents.
hub
A device which connects a series of flexible and centralized modules to create a
network.