Glossary
52
repeater
A device that connects two sections of a network and conveys signals between them
without making routing decisions or filtering packets.
router
A device that connects two or more sections of a network and allows information to
flow between them. A router examines every packet it receives and decides whether to
block the packet from the rest of the network or transmit it. The router will attempt to
send the packet through the network by the most efficient path.
server
Provides services to clients. This term may also refer to the computer on which the
service is based.
socket
The association of a port with an IP address, serving as an identification of sender or
recipient.
stack
The software code which implements the protocol being used. In the case of the NOE
modules it is TCP/IP.
STP
Shielded Twisted Pair. A type of cabling consisting of several strands of wire
surrounded by foil shielding, twisted together.
subnet
A physical or logical network within an IP network, which shares a network address
with other portions of the network.
subnet mask
Used to indicate which bits in an IP address identify a subnet.
switch
A network device which connects two or more separate network segments and allows
traffic to be passed between them. A switch determines whether a frame should be
blocked or transmitted based on its destination address.
TCP
Transmission Control Protocol.
TCP/IP
A protocol suite consisting of the Transmission Control Protocol and the Internet
Protocol; the suite of communications protocols on which the Internet is based.