Filter
Top Products
31
CLEARING A STORED CHANNEL
If you no longer want a frequency stored in a channel
(and you do not want to replace that frequency with a dif-
ferent one), follow these steps to clear the stored fre-
quency.
1. Select the channel that you want to clear.
2. Press
PGM
.
PGM
appears on the display.
3. Press
CLEAR
. The frequency number flashes on the
display.
4. Press
E/L-OUT
.
L/O
(lockout — see “Locking Out
Channels” on Page 32) appears, the channel num-
ber flashes, and the frequency number changes to
000.0000
on the display to indicate the channel is
cleared.
5. To clear another channel, use the number keys to
enter that channel number (1-50), then press
PGM
again. Or, repeatedly press
PGM
until the desired
channel number appears. Then repeat Steps 3-4.
20-310.fm Page 31 Wednesday, August 4, 1999 10:49 AM