Filter
Top Products
7.1.2. User Mode
For the device to enter User Mode, reset must be held active while the microcontroller mode pins are held in states specified for User Mode
operation. 100K pull up and pull down resistors are used to set the pin states during reset.
The H8SX/2215R supports four user modes. The memory map in all of these modes is 16Mbyte in size. The default user mode for CPU
board supporting H8S2215R is mode 7.
FDT Settings
MD2 MD1
MD0 LSI State after Reset
End
A B
1 1 1 User Mode 0 1
Table 7-3: Mode pin settings
Figure 7.2: User mode FDT configuration
20