Filter
Top Products
( 31 / 76 )
Table 3.2 Switch settings of the M306H2T-RPD-E (2/4)
Switch Signal Setting Description
SW4 P8
7/XCIN
P86/XCOUTSW5
Connects the P8
7/XCIN pin of MCU to the target
system. (Uses P87/XCIN pin as port P87)
Connects the P86/XCOUT pin of MCU to the target
system. (Uses P86/XCOUT pin as XCOUT and connect
XCOUT to the target system)
Connects the P86/XCOUT pin of MCU to the target
system. (Uses P86/XCOUT pin as XCOUT and opens
XCOUT)
Uses P8
7/XCIN pin as XCIN.
Connects the P8
6/XCOUT pin of MCU to the target
system. (Uses P86/XCOUT pin as port P86)
P87
XCIN
SW4
P87/XCIN
(Factory-setting)
P87
XCIN
SW4
P87/CIN
P86
OPEN
XCOUT
SW5
P86/XCOUT
P86
XCOUT
SW5
P86/XCOUT
(Factory-setting)
P86
XCOUT
SW5
P86/XCOUT
OPEN
OPEN
IMPORTANT
Note on Switch Settings:
• Switches SW1 (CNVSS) and SW2 (BYTE) are used for debugging operation without
connecting the target system. When connecting the target system, set both of them
"OPEN".