Renesas M306H2T-RPD-E Network Card User Manual


  Open as PDF
of 76
 
( 32 / 76 )
Table 3.3 Switch settings of the M306H2T-RPD-E (3/4)
Switch Signal Jumper switch setting
SW7 Unused
UnusedSW8
JC1
FLX
JC1
FLX
Connects the SYNCIN pin to the
RCA connector JC1 on the M306H0T-
PRT. (Factory-setting)
SW6 SYNCIN
CVIN1SW9
UnusedSW10
Connects the SYNCIN pin to the
target system via the FLX160.
SYNC/HOR
SYNC/HOR
JC2
FLX
Only this setting is available.
(Factory-setting)
JC2
FLX
Do not use this setting.
JC3
FLX
Only this setting is available.
(Factory-setting)
JC3
FLX
Do not use this setting.
JC4
FLX
Connects the CVIN1 pin to the RCA
connector JC4 on the M306H0T-
PRT. (Factory-setting)
CVIN1
JC4
FLX
Connects the CVIN1 pin to the target
system via the FLX160.
CVIN1
JC5
FLX
Only this setting is available.
(Factory-setting)
JC5
FLX
Do not use this setting.
 previous next