Filter
Top Products
4 Using the FoUSB
4.1.3 Details of Main Button 1
1) “OPEN” button
This button reads the downloading (programming) file to the Target MCU.
(1) Click the “OPEN” button, and the screen shown in Figure 4-5 will appear, allowing
you to choose the file to download into the Target MCU. The type of file that can be
downloaded is HEX or Motorola. After selecting the file to download, click the
<Open> button.
Figure 4-5 Open screen
(2) The ID code is automatically read in. Click the <OK> button.
If file don’t have ID code, a message is not displayed.
Figure 4-6 ID code screen
Note: A file which is out of flash area cannot be open.
31