4 Using the FoUSB
Example of File input
In this example, the ID code of “01 02 03 04 05 06 07” is programmed in the Target
MCU.
First, click the “OPEN” button and open the HEX file or Motorola file which has an
ID code. Click the <OK> button on the ID code screen which FoUSB displays. The
Motorola file with the ID code of “01 02 03 04 05 06 07” is open in this example.
Next, click the “UNLOCK” button. The screen into which the ID code of the read file
was input is displayed.
When clicking the “OK” button, the ID code written in the Target MCU and the input
ID code match and the Target MCU will be unlocked.
39