5 Using the KD
5. Using the KD
5.1 Using the KD
5.1.1 Before Starting the KD
1) Corresponding MCU become only R8C/Tiny, M16C/10, M16C/20, M16C/Tiny,
M16C/60 series, M16C/80 and M32C/80 series.
2) Check to see that the KD is installed in your host computer (PC).
3) Check to see that PC, USB Cable, USB Monitor Board, Flat Cable and Target Board
are firmly connected. (See Figure 5-1)
USB Monitor Board
USB Cable
Flat Cable
Target Board
Figure 5-1 connect-2
49