Filter
Top Products
Basic Functions
23
2
Basic Functions
Note
❒ You can select functions to be acti-
vated when System Reset is turned
on, when Energy Saver is turned
off, or after the machine is pow-
ered on. See p.56 “Settings You
Can Change with the User Tools”.
❒ You can change default settings for
basic functions. See p.56 “Settings
You Can Change with the User
Tools”.
Adjusting Copy Image Density
You can adjust the copy image densi-
ty to match your originals.
If you require darker or lighter cop-
ies, adjust the image density yourself.
A
AA
A
Press the {
{{
{Lighter}
}}
} or {
{{
{Darker}
}}
} key
to adjust the image density.
Selecting an Original Type
There are two ways to match your
originals:
❖
❖❖
❖ Text
If you do not select either mode,
your originals will be scanned
with the settings suitable for text
originals with this mode.
❖
❖❖
❖ Photo
Delicate tones of photographs and
pictures can be reproduced with
this mode.
Note
❒ You can change the detailed set-
tings for Text and Photo each with
the User Tools. See p.56 “Settings
You Can Change with the User
Tools”.
A
AA
A
Press the {
{{
{Original}
}}
} key, and then
select the original type.
Note
❒ Press the {
{{
{Original}
}}
} key to step
through the following types:
Upper indicator lit Text
Lower indicator lit Photo
StellaC-AE-CopyF_V4_FM.book Page 23 Wednesday, July 4, 2001 11:21 AM